Stick & Go® 60 cm x 10 m
676010
A white self-adhesive film, available in 3 sizes: 60 cm x 10 m, 60 cm x 25 m and 100 cm x 25 m.
Stick & Go® for quick and efficient protection of surfaces
This strong, self-adhesive, white film is designed to protect multiple surfaces, such as mixing tables and cabin floors, from damage and paint contamination. Easy to apply, provides good bonding to both smooth and rougher surfaces. It can be directly used from the roll, however for additional ease of application use you can use a Colad Foil Dispenser. Also easy to remove, does not leave any adhesive residue on the surface up to 10 days.
Key features
- A self-adhesive strong and durable white film. Makes cleaning very easy
- White colour for optimal light reflection
- Acrylic adhesive layer -no tape needed
- Easy to apply and cut
- Good chemical resistance
- Good barrier to water vapor
- Good puncture, flex and crack resistance
- Anti-slip surface
- Easy to remove, doe not leave adhesive residue
- Low electrostatic charge
Product details
- Brand
- Colad
- Number
- 676010
Application
-
Colad Stick & Go® is not conductive. To identify if Stick & Go® is suitable to apply in your ATEX working area, the user has the responsibility to identify and assess the risks involved applying the product in his process, following the ATEX user directive 99/92/EG.
Following the requirements in the norm EN 60079-32-1, the user could identify that for gas group IIA & IIB Stick & Go® could be suitable to apply on electrically guiding surfaces as for example stainless steel mixing tables in zone 2, as the product is not thicker than 2 mm. The risks and compliance has to be always assessed by the user, and is by the ATEX user directive 99/92/EG always the responsibility of the user.
# Where Stick & Go® is not conductive, it is not suitable to be applied on the floor of a ATEX zoned area (zone 0-1-2 / 20-21-22).
## The user should always identify and asses if the product Stick & Go® is creating risks in his process, it’s the users responsibility to meet the requirements set in the ATEX user directive 99/92/EG and identify if Stick & Go® can safely be used in his process.
### Only people with sufficient knowledge of the ATEX user directive 99/92/EG are allowed to assess the risk in a ATEX zoned area.
IN CASE OF DOUBT, DO NOT USE THE PRODUCT AND CONSULT AN ATEX EXPERT!
Frequent Asked Questions
Colad Stick and Go® can not to be applied in ATEX zone 1, 2, 20, 21 and 22.
Colad Stick and Go® has a good resistance against oil and greases.
This Colad product is easy to recycle and it is not harmful to the environment.
Downloads
| Name | Asset Type | Language | File type | Download |
|---|