Industrial Nitrile Gloves

Specifications

Gloves for when you are in continuous contact with solvents. Available in L and XL.

Industrial Nitrile Glove with excellent grip

Recommended when you are in continuous contact with solvents. Resistant to most chemicals. Excellent grip and molded to the contours of the hand. Highly comfortable and suitable for multiple use. The gloves are fitted with a soft, anti-allergic liner that prevents allergies and strengthens the gloves. Before use, check glove for any damage. Do not use a damaged glove.

Features and benefits of the Industrial Nitrile Gloves

Protect against solvents, acids, oil, grease and lubricants
Good protection/flexibilty ratio
Molded to the contours of the hand with bended fingers, preformed palm and non-skid profile

Technical specifications of the Industrial Nitrile Gloves

Colour: Green
Packaging: One pair in a plastic bag with size indication
Packaging unit: 12 pairs in a carton
Material: Nitrile
Length: 330 mm
Weight: 90 g
Design: Non-slip fingers
Available sizes: L and XL

Certificates of the Industrial Nitrile Gloves

Personal Protective Equipment (PPE) CAT III according to European regulation (EU) 2016/425. PPE of complex design protects against risks that cause irreversible damage to health.

CE Notified body number: 2777. CE Ongoing conformity: 0598.

EU Type examination test results

EN ISO 374-1:2016+A1:2018/Type A AJKLMNOPT	Methanol (A) - Level 2 - Degradation: 70.1% Toluene (F) - Level 1 - Degradation: 81.8% n-heptane (J) - Level 6 - Degradation: 0.0% 40% Sodium Hydroxide (K) - Level 6 - Degradation: 4.5% 96% Sulphuric Acid (L) - Level 3 - Degradation: 61.9% 65% Nitric Acid (M) - Level 2 - Degradation: 98.7% 99% Acetic Acid (N) - Level 3 - Degradation: 91.9% 25% Ammonium Hydroxide (O) - Level 6 - Degradation: -5.8% 30% Hydrogen Peroxide (P) - Level 6 - Degradation: -11.7% 37% Formaldehyde (T) - Level 6 - Degradation: -15.6%
	Level 1: > 10 minutes	Level 4: > 120 minutes
	Level 2: > 30 minutes	Level 5: > 240 minutes
	Level 3: > 60 minutes	Level 6: > 480 minutes

EN 388:2016+A1:2018 4101X	Abrasion resistance	Level 4
	Blade cut resistance	Level 1
	Tear resistance	Level 0
	Puncture resistance	Level 1
	TDM cut resistance	Level X

Level 0 - Falls below minimum performance level for given individual hazard.
Level X - Not tested or test method not suitable for glove design or material.

Art.no.	Variant
5330000	L
5330002	XL

Downloads

Frequently Asked Questions

Colad offers a complete range of gloves, suitable for all steps in the paint process. We categorize three types of gloves for different steps in the paint process: 1. Preparation: For disassembly, assembly and preparation we provide you with the Colad Polyester Preparation Gloves. Colad Preparation Gloves offers protection against mechanical risks. The EN 388:2016+A1:2018 test indicates the abrasion, blade cut, tear and puncture resistance. 2. Painting: Colad disposable nitrile gloves are especially developed for use during the paint process, offering comfort and protection for the user and protection against paint contamination. 3. Cleaning: For cleaning with various chemicals, Colad advises to use their Industrial Nitrile or Neoprene gloves. These Gloves are fitted with a soft, anti-allergic liner that prevents allergies and strengthens the gloves. Both Colad gloves are tested according to EN ISO 374-1-:2016+A1:2018/Type A (chemical resistance), EN ISO 374-4:2019 (degradation) and EN ISO 374-5:2016 (bacteria and virus) which means they are leak-proof, protect against mechanical risks and chemical dipping (full contact).